While you are researching mitsubishi fbc 18k 1800kg counterbalance forklift in and around Perth & Kinross check the state of the forks on any second hand forklift you look at. Bent forks may need to be replaced. The best way to check this is simply to put the mast in a vertical position and lower the forks to the floor. Once at the floor use a tape to check that both fork tips are the same height from the ground.

When looking into mitsubishi fbc 18k 1800kg counterbalance forklift in and around Perth & Kinross bear in mind that lighter loads on standard pallets can often be moved on a 1.5T capacity forklift. These are smaller than the standard 2.5T forklift and can therefore give you some space flexibility in your warehouse.

If you are investigating mitsubishi fbc 18k 1800kg counterbalance forklift in and around Perth & Kinross it may help to be aware that if you only need to offload goods once a week, move them into a warehouse or storage area; set them on the ground; break down the pallets and position the goods where needed then an inexpensive used or second-hand forklift will probably be more than adequate.